Release Schedule » History » Revision 59
« Previous |
Revision 59/86
(diff)
| Next »
bmbouter, 02/26/2018 07:53 PM
Adding 2.15.3 release page
Releases In Progress¶
Future Releases¶
Following the 2.11 release, Pulp development will have transitioned almost entirely to working on the upcoming Pulp 3 release. Any releases after Pulp 2.11 will be scheduled as-needed.
Release Stages¶
Beta - Dev believes the release is complete and ready for testing. Any bug fixes related to this release are still acceptable.
Release Candidate (RC) - Only bug fixes related to regressions, upgrade failures, or similar severity are accepted at this point.
Generally Available (GA) - Release is generally available in the stable repositories.
Release Stage Conditions¶
Releases spend a minimum time of one week in a given release stage. Subsequent releases in a given stage do not "reset the clock" on this waiting period. Care is taken to verify release-breaking bugs prior to advancing to the next release stage, which usually adds a few days to the release cycle, preventing "rapid-fire" releases.
Z Release Beta¶
There are no release candidates for Z releases. Z releases advance directly to GA after testing reveals no new blocking issues, and have passed acceptance testing by QE (including upgrade testing).
Y Release Beta¶
Y releases advance to RC after testing reveals no new blocking issues, and have passed acceptance testing by QE (not including upgrade testing).
Y Release RC¶
This release stage cannot advance to GA until the upgrade path from previous versions of pulp is confirmed to be working.
Y Release Cadence¶
Due to the unpredictable timeline of the release schedule once a Beta is released, the Y release cycle begins on the day of the previous Beta Y release. While unpredictable, the 12-week period between beta releases should be more than adequate to get that release Generally Available and still allow a few weeks before the next Beta is announced.
- week 0: (Y-1 Release) Previous Y release cycle begins with a Beta Release
- week 11: (Y Release) Y release cycle begins with a Dev Freeze
- release branch created for this Y Release, preventing the addition of new features.
- build system adapted to build from release branch
- master branch now tracks development for next Y release
- beta is built from release branch
- week 12: (Y Release) Y Beta Release
- week 12+1?: Y release advances through Beta stage to RC as stage conditions are met. Release schedule is no longer time-based.
- week 12+2?: Y release advances through RC phase to GA as stage conditions are met.
This release cadence was introduced to coincide with the release of the 2.11.0 Beta on 2016/10/25. If desired, the previous Y release cadence can be seen in the history of this wiki document.
2.y releases are no longer time based and therefore are not dependent on when previous y release beta was cut. The rest of the schedule is followed
Z Release Cadence¶
The Z release cycle starts with a beta released roughly every three weeks. A beta Z release should begin place two weeks after the previous Z release becomes Generally Available. The Z release will spend a minimum of one week in Beta before being eligible to become Generally Available.
- week 0: (Z-1) Previous Z Beta Release
- week 1: (Z-1) Previous Z GA Release
- week 2: Dev Freeze
- week 3: Beta Z Release
- week 4: GA Z Release
Z releases are released as often as possible based on this schedule, but are subject to upgrade testing which often extends the beta period beyond a week.
Version Numbering¶
To the best of our ability, our releases adhere to semantic versioning. The releases in this document correspond to releases that increment a given release component (Y or Z) as defined by semantic versioning:
http://semver.org/#spec-item-2
In short, a "Z Release" increments the "Z" release component (e.g. 1.0.0 -> 1.0.1), and indicates no new features; only bug and security fixes have taken place. A "Y Release" increments the "Y" release component (e.g. 1.0.0 -> 1.1.0), and indicates that new features have been introduced, but backward-incompatible API changes have not taken place.
"X" Releases are not covered by this document. At the moment, they are rare enough as to be handled case-by-case. The next X release, Pulp 3, is currently being actively discussed on the pulp-dev mailing list. If you're interested in participating, go here to subscribe:
https://www.redhat.com/mailman/listinfo/pulp-dev
Past Releases¶
Versions listed here have already become Generally Available, and are included here for historical reference. 2.11.2 was the first release to have a release status page in this wiki.
- 2.15.1 Release Status
- 2.15.0 Release Status
- 2.14.3 Release Status
- 2.14.2 Release Status
- 2.14.1 Release Status
- 2.13.4 Release Status
- 2.14.0 Release Status
- 2.13.3 Release Status
- 2.13.2 Release Status
- 2.13.1 Release Status
- 2.13.0 Release Status
- 2.12.2 Release Status
- 2.12.1 Release Status
- 2.11.2 Release Status
- 2.12.0 Release Status
Updated by bmbouter almost 7 years ago · 59 revisions